3DPro® Gas Line
High-purity gas to guarantee an accurate 3D printing process.
It is precisely for this reason, these two pollutants must be reduced as much as possible, since there is no chance to repair damages, which translates into product loss.
3DPro® Dry Gas Tube
Multilayer hose to ensure the right amount of gas supplied to the 3D printer.
3DPro® Purifier
Filter cartridges with Nanochem technology to retain traces of oxygen and moisture in gases.
3DPro® Powder Dry Cabinet
Inertised cabinet in the storage of metal powders for 3D printing.
3DPro® MiruGas®
A panel for total gas control management.
3DPro® PrintPure
Filtration system for recirculation gas impurities in PBF 3D printers.
Effects of oxygen and moisture traces
3D printing is a multilayer process, and if during this process, the surface oxidises, then it remain strapped in the product.
Gases we use
The PBF process commonly use nitrogen withmaterials like stainless steel, or Argon for othertypes of materials. We can help you analyse whatis the best performing mixture for your DED orPBF process. Another gas solution is helium, which is used in the EBM process, although beingexpensive for this process, it consumes a littleamount.
On the other hand, the FDM process uses argonnitrogen and small percentages of hydrogen inargon, but only in the metal sintering phase. Forfurther information don’t hesitate to contact us.
-
Ar Argon for Additive manufacturing +
Argon for Additive ManufacturingThanks to its chemical-physical characteristics, it is the most used gas for all additive manufacturing processes, mostly for those materials that are particularly reactive with oxygen or other air components.
-
N2 Nitrogen fo Additive manufacturing +
Nitrogen for Additive ManufacturingUnder normal conditions nitrogen is an inert gas but which at high temperatures can react with some materials also used in 3D printing. In 3D printing, nitrogen is mainly used for processing austenitic steels.
-
He Helium for Additive manufacturing +
Helium for Additive ManufacturingThe chemical and physical characteristics of helium make it ideal for PBF and DED 3D printing processes, it is often used mixed with other gases. Also, helium is mainly used in EBM processes which due to the low gas consumption.
-
Sanarc®H3 Sanarc®H3 +
Sanarc®H3 for Additive ManufacturingAdditive Manufacturing.
Do you still have questions?
At Nippon Gases we are called “The Gas Professionals” for a reason, and it’s because we’ll be able to solve any doubt.